Adjustable kickstand for bike – M6 mount, 40 mm spacing for i:SY E5 ZR F CX

Shorter adjustable kickstand with an extended foot

This black kickstand for a suitable 20–22-inch bike features two mounting points and a retractable lower leg. The extended foot increases the contact surface on the ground.

Features and Compatibility

• Model: i:SY E5 ZR F CX.
• Black adjustable kickstand; length approximately 308–367 mm.
• Mounting: two M6 holes with a 40 mm spacing.

Approximate Dimensions

• Adjustable kickstand length: 308–367 mm.
• Mounting plate: 60 × 22 mm.
• Mounting: M6 bolts, 40 mm spacing.

The length is adjustable from approximately 300 to 367 mm. A suitable mounting point with 40 mm spacing and M6 threads is required. Adjust the tilt of the parked bike and check clearance from the chain and rear brake.

Two M6 threaded holes with 40 mm spacing on the appropriate rear-left part of the frame are required. Also check for the necessary kickstand length and clearance around the brake and chain.

Stable Support While Parked

• Attach the kickstand to the designated part of the frame and adjust the length for a moderate tilt of the parked vehicle. A setting that is too short or too long will reduce stability.
• Ensure that the folded kickstand does not hit the wheel, brake, or drivetrain parts. The vehicle should stand stably on a firm surface before you let go.
• The kickstand is intended for parking only. Do not load it with additional body weight while sitting on the vehicle; check the mount and bolts after a heavy impact.