Adjustable kickstand – M6 mount, 40 mm spacing for i:SY N3.8 ZR CX Comfort

Shorter adjustable kickstand with extended foot

Black kickstand for compatible 20-22" bikes featuring two mounting points and an extendable lower leg. The extended foot increases contact area on the ground.

Features and fitment

• Model: i:SY N3.8 ZR CX Comfort.
• Black adjustable kickstand; length approximately 308–367 mm.
• Mounting: two M6 holes with 40 mm spacing.

Approximate dimensions

• Adjustable stand length: 308–367 mm.
• Mounting plate: 60 × 22 mm.
• Mounting: M6 screws, 40 mm spacing.

The length is adjustable from approximately 300 to 367 mm. Requires a compatible mounting point with 40 mm spacing and M6 threads. Adjust the tilt angle of the parked bike and check clearance from the chain and rear brake.

Two M6 threaded holes with 40 mm spacing on the appropriate rear left frame area are required. Also, check the required stand length and clearance from the brake and chain.

Stable support while parking

• Attach the kickstand to the designated frame section and adjust the length for a moderate tilt of the parked vehicle. An overly short or long setting reduces stability.
• Ensure the folded kickstand does not strike the wheel, brake, or drivetrain. The vehicle should stand stable on firm ground before releasing your grip.
• The kickstand is intended for parking only. Do not apply extra body weight while sitting on the vehicle; check the mount and screws after any heavy impact.