NUTT Y5 hydraulic brake set for NAMI Burn-E 2

NUTT Y5 hydraulic brake set for NAMI Burn-E 2

The set for the front and rear brake of the NAMI Burn-E 2 includes left and right NUTT Y5 levers, two black calipers, and hydraulic hoses of different lengths. The signal cables on the levers are intended for the motor-cut-off function during braking.

Contents and dimensions

• Front hose: 1300 mm; rear hose: 2100 mm per manufacturer data.
• Two NUTT Y5 levers, approx. 180 mm long, with a clamp diameter of approx. 22.5 mm.
• Lever signal cables: approx. 384 mm, with red-marked connectors.
• The pictured caliper measures approx. 88.6 × 61.5 × 44 mm; the mounting hole spacing is approx. 52 mm.
• Includes hose connectors and bolts as shown in the photos.
• Brake discs are not included.

Fitment and installation

When installing on NAMI Burn-E 2, compare the installation side of both calipers, brackets, diameter and thickness of existing discs, and the signal connectors. The hoses must allow for proper routing without tension during full handlebar turns and suspension travel. When converting existing brakes, suitable adapters may be required; identical bolt spacing does not inherently guarantee the correct position of the pads on the disc.

Installation and use

Installation, hose connection, and bleeding should be performed by a qualified technician. Before use, check for leaks, free rotation of both wheels, proper functioning of the brake cut-off, and break in the pads correctly.