ULIP 100/55-6.5 slick tubeless tire for NAMI Burn-E 2 Max

ULIP 100/55-6.5 slick tubeless tyre for NAMI Burn-E 2 Max

Slick tread: Full Slick smooth tread without drainage channels.

The ULIP Full Slick is a black tubeless tyre in 100/55-6.5 dimension with an almost completely smooth tread surface. It has no pronounced water drainage channels or off-road blocks.

Features and fitment

• Model: NAMI Burn-E 2 Max.
• ULIP Full Slick 100/55-6.5; tubeless; smooth tread without channels.

Approximate dimensions

• Outer diameter: 268 mm.
• Inner diameter: 162 mm.
• Width: 101 mm.

The smooth Full Slick tread is intended for riding on dry, paved surfaces. Before installation, check the 6.5-inch tubeless seat, rim width, and clearance by the forks and mudguard.

Tyre inspection and installation

• Replace the tyre if the tread is worn, or if there are cracks, bulges, or a damaged bead. Before installation, remove any foreign objects and check the condition of the rim.
• Release the pressure from the wheel, remove the old tyre, and install the new one without damaging the bead. Observe any rotation direction arrows.
• Adjust the pressure according to the allowed values for the wheel and load. Check for even seating and free wheel rotation; check the pressure again before your next ride.

The smooth tread surface has no water drainage channels. The tyre is intended for dry, paved surfaces; it is not suitable for wet or loose terrain.