ULIP Superior Metal brake pads for ENGWE L20 3.0 Pro – ZOOM shape

Superior Metal in wide ZOOM shape

The ULIP Superior Metal brake pads feature an orange back, a wide rectangular lining, and a top mounting tab. The multi-metal version is supplied as a pair with a tension spring and retaining clip.

Features and fitment

• Model: ENGWE L20 3.0 Pro.
• Brake pad material: multi-metal – ULIP Superior Metal.
• ULIP Superior Metal; orange pads; pair with spring and clip.

Approximate dimensions

• Pad dimensions: 30.6 × 35.1 × 4 mm.
• Retaining clip hole diameter: 3.3 mm.

The dimensions are approximately 30.6 × 35.1 × 4 mm, and the hole diameter for the retaining clip is approximately 3.3 mm. Check the exact caliper markings for your model and the suitability of the disc for the chosen pad type.

For use only with a brake caliper with the ZOOM pad shape specified for this product. Always compare with the old pad before selecting; the same vehicle model may be equipped with a different caliper.

Brake pad material

The ULIP Superior Metal multi-metal lining combines metal components with a binder. Metal pads generally handle heat well during repetitive braking, but may be louder and cause more wear to the disc than organic pads. Use a disc that allows metal pads, and properly bed in the new pair after installation.

When to replace and how to start

• Inspect the pads if you notice reduced braking performance, uneven wear, or contamination. Always replace both pads in the same caliper; check your brake manual for the minimum allowed thickness.
• Remove the retaining clip and the old pair. Prepare the space for new pads according to the procedure for your specific caliper, then insert the spring, the new pair, and the clip. Do not grease the friction surfaces.
• Check for free wheel rotation and lever operation. Bed in the new pads with several gradual decelerations in a safe location, without locking the wheel.