Reinforced 10 × 2.5 inner tube with 90° valve for Apollo Ghost electric scooter

ULIP reinforced inner tube with angled valve

The ULIP 10 × 2.5 inner tube features a reinforced design and a metal valve with a 90-degree bend. It is intended for a suitable ten-inch wheel assembly with an inner tube.

Features and fitment

• Model: Apollo Ghost.
• ULIP 10 × 2.5 reinforced inner tube; angled valve 90°.

Approximate dimensions

• Outer diameter of inner tube: 235 mm.
• Inner diameter of inner tube: 148 mm.
• Inner tube width: 43 mm.
• Angled valve: length 35 mm, angle 90°.

In addition to the tire size, check the valve direction and accessibility near the motor. The valve should protrude from the rim opening without tension, with enough space to attach a pump.

Changing without pinching the inner tube

• Before replacing, identify the cause of the puncture in the tire or on the rim. A foreign object, sharp edge, or damaged rim tape can immediately damage the new inner tube as well.
• Inflate the inner tube slightly, align the valve with the opening, and distribute it evenly in the tire. When installing the bead, do not pinch it with mounting tools.
• Inflate to the pressure permitted for the wheel assembly. Check the valve position and sealing; do not use the valve cap to stop leaks.