ULIP reinforced 10×2.75-6.5 inner tube for ECO Speed 10X V2

Reinforced ULIP inner tube with 90-degree valve

The ULIP 10 × 2.75-6.5 inner tube features a thicker wall design and a metal valve angled at a right angle. A black protective cap is on the valve.

Features and fitment

• Model: ECO Speed 10X V2.
• Reinforced ULIP inner tube 10×2.75-6.5.
• Metal valve is bent outwards by 90°.

Approximate dimensions

• Outer diameter of inner tube: 244 mm.
• Inner diameter: 153 mm.
• Width: 45.1 mm.
• Length of curved valve: 36 mm.
• Packaging: 150 × 72 × 62 mm.
• Packaging hanger tab: 50 × 22.5 mm.

Before installation, compare the tire dimension and valve orientation relative to the motor hub. Remove foreign objects and check the rim edges, then insert the inner tube without kinks or pinching.

Replacement without pinching the inner tube

• Before replacement, find the cause of the puncture in the tire or on the rim. A foreign object, sharp edge, or damaged protective strip can damage the new inner tube immediately as well.
• Inflate the inner tube slightly, align the valve with the hole, and distribute it evenly within the tire. When seating the edge, do not pinch it with mounting tools.
• Fill to the pressure allowed for the wheel assembly. Check the valve position and sealing; do not use the valve cap to stop leaks.