ULIP 20x4.0 road tire with TH751 profile for ENGWE Engine Pro 2.0

Road tire ULIP 20x4.0 with TH751 profile for ENGWE Engine Pro 2.0

Road profile: Densely packed low blocks of the TH751 profile.

The black ULIP 20 × 4.0 tire has a TH751 profile with low blocks running across a wide tread. This is an outer tire for a compatible fat bike.

Features and compatibility

• Model: ENGWE Engine Pro 2.0.
• ULIP 20 × 4.0; black TH751 profile with small low blocks.

Approximate dimensions

• Outer diameter: 550 mm.
• Inner diameter: 404 mm.
• Width: 155 mm.

The 98-406 marking helps verify the bead seat diameter of the rim. Also compare the width, inner tube, and clearance under the mudguard. The tire is wide, so there must remain enough clearance from the frame during turning and under load.

Tire inspection and installation

• Replace the tire if there is excessive tread wear, cracks, bulges, or a damaged edge. Remove any foreign objects and check the condition of the rim before installation.
• Release the pressure from the wheel, remove the old tire, and install the new one without damaging the edge. Note any potential direction-of-rotation arrow.
• Set the pressure according to the allowed values for the wheel and load. Check for even seating and free rotation; recheck the pressure before the next ride.