Road tire ULIP 20x4.0 with TH751 tread for ENGWE Engine X

Road tire ULIP 20x4.0 with TH751 tread for ENGWE Engine X

Road tread: Densely spaced low-profile blocks of the TH751 tread.

The black ULIP 20 × 4.0 tire features the TH751 tread with low blocks spanning the wide tread surface. This is the outer tire for a compatible fat bike.

Features and fitment

• Model: ENGWE Engine X.
• ULIP 20 × 4.0; black TH751 tread with low blocks.

Approximate dimensions

• Outer diameter: 550 mm.
• Inner diameter: 404 mm.
• Width: 155 mm.

The 98-406 marking helps verify the rim diameter. Also compare the width, inner tube, and space under the mudguard. The tire is wide, so sufficient clearance from the frame must be maintained during turning and under load.

Tire inspection and installation

• Replace the tire if the tread is worn, or if there are cracks, bulges, or damaged edges. Before installation, remove any debris and check the condition of the rim.
• Deflate the wheel, remove the old tire, and install the new one without damaging the bead. Observe any rotation direction arrows.
• Set the pressure according to the allowed values for the wheel and load. Check for even seating and free rotation; recheck the pressure before your next ride.