ULIP 20x4.0 road tire with TH751 profile for ENGWE X20

ULIP 20x4.0 road tire with TH751 tread for ENGWE X20

Road tread: Densely spaced low blocks of the TH751 profile.

The black ULIP 20 × 4.0 tire features a TH751 tread with low blocks that span the wide tread surface. This is an outer tire for a matching fat-bike wheel.

Features and fitment

• Model: ENGWE X20.
• ULIP 20 × 4.0; black TH751 tread with low blocks.

Approximate dimensions

• Outer diameter: 550 mm.
• Inner diameter: 404 mm.
• Width: 155 mm.

The 98-406 marking helps verify the rim bead seat diameter. Also, compare the width, inner tube, and clearance under the fender. The tire is wide, so sufficient clearance from the frame must be maintained during cornering and under load.

Tire inspection and installation

• Replace the tire if the tread is worn, or if there are cracks, bulges, or a damaged bead. Before installation, remove any debris and check the condition of the rim.
• Deflate the wheel, remove the old tire, and install the new one without damaging the bead. Observe any rotation direction arrows.
• Adjust the pressure according to the allowed values for the wheel and load. Check for even seating and free rotation; re-check the pressure before the next ride.