Road tire ULIP 20x4.0 with TH751 tread for ENGWE M1

ULIP 20x4.0 road tire with TH751 profile for ENGWE M1

Road tread: Densely spaced low blocks of the TH751 profile.

The black ULIP 20 × 4.0 tire has a TH751 profile with low blocks running across a wide tread surface. This is an outer tire for a suitable fat-bike wheel.

Features and fitment

• Model: ENGWE M1.
• ULIP 20 × 4.0; black TH751 profile with low blocks.

Approximate dimensions

• Outer diameter: 550 mm.
• Inner diameter: 404 mm.
• Width: 155 mm.

The 98-406 marking helps verify the rim seat diameter. Also compare the width, inner tube, and clearance under the fender. The tire is wide, so there must remain sufficient clearance from the frame during turning and under load.

Tire inspection and installation

• Replace the tire if the tread is worn, or if there are cracks, bulges, or damaged edges. Before installation, remove debris and check the condition of the rim.
• Release the air from the wheel, remove the old tire, and install the new one without damaging the bead. Observe any rotation direction arrow.
• Set the pressure according to the allowed values for the wheel and load. Check for even seating and free movement; check the pressure again before the next ride.