Black ergonomic grips for Teverun Fighter Mini Pro – 120 mm grip, 131 mm total

Ergonomic black grips with clamps on both ends

The pair of black grips features a textured surface and extended palm support. Clamps on both ends restrict the rotation of the properly installed grip on the handlebar.

Features and fitment

• Model: Teverun Fighter Mini Pro.
• Pair of black ergonomic grips with palm support.
• Grip area 120 mm; total length 131 mm.
• Mounting 22.2 mm; clamps on both ends.

Approximate dimensions

• Grip length: 120 mm.
• Total length: 131 mm.
• Diameter at inner end: 32 mm.
• Support width: 44 mm.
• Mounting diameter: 22.2 mm.

The grip area is 120 mm, and the total length with the ends is approximately 131 mm. The inner diameter is 22.2 mm. Before installation, check the clearance near the throttle and brake lever; do not force the replacement of shorter right grips near a twist-throttle.

Support and grip adjustment

• Remove the old grips, then clean and dry the handlebar. Before tightening, check that the new grip sits fully on the intended part of the tube.
• Adjust the position for relaxed wrist comfort and brake lever reach. Tighten the clamping parts, where present, according to the instructions and check that the grip does not rotate.
• Check the throttle for free return. Replace torn, hardened, or slippery grips; do not apply lubricant to the grip surface.