Magura MT5/MT7 brake pads for Stevens E-Triton 45 PT6 – Magura MT5/MT7

Dual friction area for compatible Magura calipers

Each black backing plate features two separate friction areas and an extended upper tab. This design is intended for compatible Magura MT5, MT5e, or MT7 calipers.

Features and fitment

• Model: Stevens E-Triton 45 PT6.
• Black backing plates with two separate pad surfaces each.
• Design for Magura MT5/MT7.

Before choosing, check the actual brake on your vehicle. The pads match the specified caliper shape, including relevant upgrades, but are not a direct replacement for stock brake pads of another brand.

Only for Magura MT5, MT5e, or MT7 calipers with compatible pad shape. If the vehicle has a different caliper, these pads are not a direct replacement.

Brake pad

The friction material presses against the disc, while the backing plate holds it in the correct position within the caliper. Replace both pads together if they are worn, damaged, or contaminated with oil. During installation, also check the retaining clip and the free rotation of the wheel.

When to replace and how to start

• Inspect the pads if braking performance decreases, or in case of uneven wear or contamination. Replace both pads in the same caliper; check the minimum allowed thickness in your brake manual.
• Remove the retaining clip and the old set. Following the procedure for your specific caliper, prepare space for the new pads, then insert the spring, the new set, and the clip. Do not grease the friction surfaces.
• Check for free wheel rotation and lever operation. Bed in the new pads by performing several gradual decelerations in a safe area, without locking the wheel.