Color LCD display version C for KuKirin G2 Max – 6-pin connector

Color display, type C, with five cable branches

The color display features a wide black housing, a handlebar mount, and branched wiring. Type C uses a main black 6-pin connector, two green 3-pin connectors, and two red 2-pin connectors.

Features and fitment

• Model: KuKirin G2 Max.
• Color LCD display C; black housing, two clamps, and five cable branches.

Approximate dimensions

• Display: 124 × 76 × 19 mm.
• Total height with mount: 100 mm.
• Depth with mount: 68 mm.
• Clamp width: 17 mm.
• Closed clamp opening: 19 mm.

The display part measures approximately 124 × 76 mm. Before ordering, count the contacts and compare all wiring branches; displays with a similar look but different wiring are not directly interchangeable.

Replacing the electronic assembly

• Before the procedure, turn off the vehicle and disconnect the battery according to the prescribed procedure. Note the position of each connector before removing the old unit.
• Secure the new assembly to the intended locations, protect the connections, and maintain the cable routing without crimping. Match the settings to the actual vehicle configuration.
• Before putting it under load, check the display, drive response, and brake sensing. In case of mismatched connectors or communication errors, have a technician verify compatibility.