Green Ceramic Brake Pads for Electric Scooter KuKirin G4 Max

Green ceramic pads with a round bottom section

The pair of green pads features a round friction surface, an extended tab, and a flat separation spring. The ceramic compound is designed for a compatible caliper with the same profile.

Features and fitment

• Model: KuKirin G4 Max.
• Brake pad: ceramic.
• Green backing plates; ceramic compound; approx. 22.3 × 33.3 × 4 mm.
• Pair with flat spring.

Approximate dimensions

• Pad dimensions: 22.3 × 33.3 × 4 mm.
• Upper tab width: 6.4 mm.

The diameter of the round section is approximately 22.3 mm, with a total height of 33.3 mm and a thickness of 4 mm. Also compare the rectangular opening for the spring. The shape differs from the wider rectangular ZOOM pads.

Brake pad composition

Ceramic compound forms the friction surface of the pads. To ensure even contact with the disc, break in the new pair gradually after mounting. Keep the pad clean and dry; oil or grease on the friction surface reduces braking performance.

When to replace and how to start

• Inspect the pads if you notice poor braking, uneven wear, or contamination. Always replace both pads in the same caliper; check the minimum allowed thickness in your brake manual.
• Follow the instructions for your mechanical caliper to remove the old pair and release the setting for the new pads. Install both pads and the separation spring, then adjust the clearance to the disc. Do not grease the friction surfaces.
• Check wheel clearance and lever operation. Break in the new pads with several gradual decelerations in a safe area without locking the wheel.