Ignition lock for KuKirin G2 Max – 3-pin yellow connector

Ignition switch with yellow 3-pin connector

The black ignition switch mounts to the handlebar and turns on the corresponding electric circuit with a key. The set includes two keys and a cable with a yellow 3-pin connector.

Features and fitment

• Model: KuKirin G2 Max.
• Handlebar ignition switch with two keys; yellow 3-pin connector.

Approximate dimensions

• Housing: height 80 mm, top width 49 mm, bottom width 53 mm.
• Top section depth: 22.9 mm.
• Key switch depth: 32.7 mm.
• Mounting: 22 mm.
• Cable: 140 mm.

For this version, use the yellow 3-pin connector and the correct pinout. The cable is approximately 140 mm long; before installation, check the space for the key and proper throttle return.

Replacement and function test

• Before replacement, disconnect the vehicle's power supply. Note the wiring connections and install the new switch in the designated location without pinching the wiring.
• Ensure that buttons or the key operate without sticking and that the connector is properly snapped in. The handlebar must rotate without pulling the cable.
• Before riding, test each function individually. When troubleshooting contact issues, check the connector and wiring, as the fault may not necessarily be in the switch itself.