Ignition lock for KuKirin G2 Pro – 3-pin yellow connector

Ignition lock with yellow 3-pin connector

The black ignition lock mounts to the handlebar and activates the corresponding electrical circuit with a key. The set includes two keys and a cable with a yellow 3-pin connector.

Features and compatibility

• Model: KuKirin G2 Pro.
• Handlebar ignition lock with two keys; yellow 3-pin connector.

Approximate dimensions

• Housing: height 80 mm, top width 49 mm, bottom width 53 mm.
• Top depth: 22.9 mm.
• Depth at key slot: 32.7 mm.
• Mount: 22 mm.
• Cable: 140 mm.

Use the yellow 3-pin connector and correct pinout for this version. The cable is approximately 140 mm; check for clearance around the key and free movement of the throttle before installation.

Replacement and functional test

• Disconnect the vehicle's power supply before replacement. Note the wiring and install the new switch in the same intended location without pinching the wires.
• Ensure that the buttons or key operate without sticking and that the connector is properly latched. The handlebar must rotate without straining the cable.
• Test each function individually before riding. If there is a power interruption, check the connector and wiring, as the fault may not be in the switch itself.