Left rear brake caliper for electric scooter KuKirin A1

Black mechanical caliper with bracket

The brake caliper transmits cable pull via an external lever on the brake pads. The black housing is mounted on a mounting bracket and features a cable housing attachment point.

Features and fitment

• Model: KuKirin A1.
• Black mechanical cable caliper with bracket; mounting spacing approx. 51 mm.

Approximate dimensions

• Caliper: 75 × 51 × 51 mm.
• Mounting hole spacing: 51 mm.
• Mounting hole diameter: 4.7 mm.

The mounting hole spacing of the bracket is approximately 51 mm. The front or rear position depends on the specific model in this listing. Compare the lever direction, cable run, and disc position before choosing a replacement.

Mechanical brake adjustment

• Replace the caliper if it is damaged or its mechanism cannot be properly adjusted. Worn pads or a bent disc do not necessarily mean the caliper is faulty.
• Align it with the disc on the appropriate adapter, connect the cable, and adjust the pad position and lever travel according to the instructions. Tighten the bolts to the specified torque.
• The brake must engage before the lever touches the handlebar. Check the mechanism return, wheel free rotation, and the gradual break-in of new pads.