Left rear brake caliper for electric scooter KuKirin G2 Max

Black mechanical brake caliper with mount

The brake caliper transfers the cable pull via an external lever to the brake pads. The black housing is mounted on a bracket and features a cable adjuster.

Features and fitment

• Model: KuKirin G2 Max.
• Black cable-actuated mechanical caliper with mount; mounting hole spacing approximately 51 mm.

Approximate dimensions

• Caliper: 75 × 51 × 51 mm.
• Mounting hole spacing: 51 mm.
• Mounting hole diameter: 4.7 mm.

The spacing between the mounting holes on the bracket is approximately 51 mm. Whether it is a front or rear model depends on the specific vehicle version in this listing. Compare the lever orientation, cable routing, and disc position before selecting a replacement.

Adjusting the mechanical brake

• Replace the caliper if it is damaged or if its mechanism cannot be adjusted properly. Worn pads or a warped disc do not necessarily indicate a faulty caliper.
• Align it with the disc on the appropriate adapter, connect the brake cable, and adjust the pad position and lever throw according to the instructions. Tighten the bolts to the specified torque.
• The brake should engage before the lever touches the handlebar. Check the mechanism return, wheel spin, and allow the new pads to bed in gradually.