Magura MT5/MT7 brake pads for M1 Sporttechnik STERZING EVOLUTION – Magura MT5/MT7

Dual friction area for compatible Magura caliper

Each black backing plate features two separate friction areas and an extended top tab. This design is intended for compatible Magura MT5, MT5e, or MT7 calipers.

Features and fitment

• Model: M1 Sporttechnik STERZING EVOLUTION.
• Black backing plates with two separate pad surfaces each.
• Shape for Magura MT5/MT7.

Before selecting, verify the actual brake on the vehicle. These pads match the specified caliper shape even when used as an upgrade, but they are not a direct drop-in replacement for pads from a different stock brake brand.

Only for Magura MT5, MT5e, or MT7 calipers with the corresponding pad shape. If the vehicle has a different caliper, these pads are not a direct replacement.

Brake pad material

The friction material presses against the disc, and the backing plate holds it in the correct position within the caliper. Replace both pads together if they are worn, damaged, or contaminated with oil. During installation, also check the retainer and wheel clearance.

When to replace and how to start

• Inspect pads if braking performance decreases, wear is uneven, or they are contaminated. Replace both pads in the same caliper; check the brake manual for the minimum allowable thickness.
• Remove the retainer and the old pair. Prepare the space for new pads according to your caliper procedure, then insert the spring, the new pair, and the retainer. Do not grease friction surfaces.
• Check for wheel clearance and lever operation. Bed in the new pads by performing several gradual decelerations in a safe area, without locking the wheel.