Original Charging Port CQ for KuKirin A1 Electric Scooter

Flush-mount charging socket CQ with internal XT30 connector

The charging port features a threaded CQ flush-mount socket and a yellow XT30 connector on a red-black wire pair. It is attached through the appropriate housing hole with a nut.

Features and fitment

• Model: KuKirin A1.
• Flush-mount charging port CQ with three contact points and yellow XT30; cable approx. 16 cm.

Approximate dimensions

• Cable length: 16 cm.
• Socket: depth 15.1 mm.
• Fastening nut: width 16.5 mm, height 14.9 mm, thickness 3 mm.
• Connection hole diameter: 9 mm.

The cable is approximately 16 cm long. Before replacement, compare the diameter of the threaded part, the CQ shape, and the polarity. Secure the wiring with enough slack so that pulling on the charging plug does not stress the internal connection.

Connection and wiring protection

• Before working, disconnect power according to the device instructions. Compare the connector shape, polarity, signal layout, and contact condition.
• Connect the joints without forcing and protect them according to the installation location. Route the cable away from sharp edges and moving parts.
• Ensure the wiring does not get pinched during steering or folding. Before turning on, verify polarity and the arrangement of signal contacts.