Original Charging Port CQ for Electric Scooter KuKirin M4 Max

Built-in CQ charging socket with internal XT30

The charging port features a threaded CQ built-in socket and a yellow XT30 connector on a red-black pair of wires. It is secured through the corresponding housing hole with a nut.

Features and fitment

• Model: KuKirin M4 Max.
• Built-in CQ charging port with three contact points and a yellow XT30; cable approx. 16 cm.

Approximate dimensions

• Cable length: 16 cm.
• Socket: depth 15.1 mm.
• Locking nut: width 16.5 mm, height 14.9 mm, thickness 3 mm.
• Connection hole diameter: 9 mm.

The cable is approximately 16 cm long. Before replacement, compare the diameter of the threaded part, the CQ shape, and the polarity. Secure the wiring with enough slack so that pulling the charging plug does not stress the internal connection.

Wiring connection and protection

• Before working, disconnect the power according to the device instructions. Compare the connector shape, polarity, or signal layout, and contact condition.
• Connect the joints without force and protect them according to the installation location. Route the cable away from sharp edges and moving parts.
• Check that the wiring is not pinched when steering or folding. Check the polarity and signal contact layout before turning on.