Original CQ charging port for KuKirin G2 Ultra

Flush-mount CQ charging socket with internal XT30 connector

The charging port features a threaded CQ flush-mount socket and a yellow XT30 connector on a red-black wire pair. It is secured through the appropriate housing hole with a nut.

Features and fitment

• Model: KuKirin G2 Ultra.
• Flush-mount CQ charging port with three contact points and yellow XT30; cable approximately 16 cm.

Approximate dimensions

• Cable length: 16 cm.
• Socket: depth 15.1 mm.
• Mounting nut: width 16.5 mm, height 14.9 mm, thickness 3 mm.
• Connector hole diameter: 9 mm.

The cable is approximately 16 cm long. Before replacing, compare the diameter of the threaded part, the CQ shape, and the polarity. Secure the wiring with enough slack so that pulling the charging plug does not stress the internal connection.

Connection and wiring protection

• Before performing work, disconnect the power supply according to the device manual. Compare the shape of the connectors, polarity or signal layout, and the condition of the contacts.
• Connect the joints without force and protect them according to the installation location. Route the cable away from sharp edges and moving parts.
• Check that the wiring is not pinched during steering or folding. Before switching on, check the polarity and signal contact layout.