Original left brake lever for KuKirin G2

Left brake lever with electric cut-off connector

The black left lever operates with a mechanical brake cable. An additional approx. 25 cm long cable with a white 2-pin connector connects the brake switch to the scooter's electronics.

Features and fitment

• Model: KuKirin G2.
• Left black lever for mechanical brake.
• Electric cable with white connector; approximately 25 cm.
• Brake cable housing and handlebar clamp.

Approximate dimensions

• Lever: 165 × 91 × 36 mm.
• Clamp diameter: 22.5 mm.
• Cable length: 25 cm.

The lever measures approximately 165 mm, and the mounting diameter is 22.5 mm. During installation, connect the mechanical cable and the electric brake switch; then check the braking and brake lever activation detection.

Correct lever position

• Replace a damaged or bent lever and check the cable and housing. Before disconnecting the electric connector, turn off the power.
• Install the lever in an accessible position, connect the cable, and adjust the travel. Route the electric cable so that it does not become tensioned when turning the handlebars.
• Check the mechanical braking and electric brake detection separately. The lever must return freely, and the wheel must not remain braked without the brake being pressed.