Original switch for lights, turn signals, and horn for Electric Scooter KuKirin G2 Pro DB

Four control functions in one control unit

The black switch combines headlight control, left and right turn signals, the horn, and an additional power button. Functions are marked with symbols, and connection is made via a black multi-pin connector.

Features and fitment

• Model: KuKirin G2 Pro DB.
• Black switch for lights, turn signals, and horn with an additional power button; black multi-pin connector.

Approximate dimensions

• Cable length: 106 mm.
• Connector: length 29.8 mm, diameter 7.8 mm.

The cable is approximately 106 mm long. Before replacing, compare the number of pins and the support for each function in the wiring. Position the buttons within thumb reach and ensure they are not obstructed by the brake lever.

Replacement and function test

• Disconnect the vehicle's power supply before replacing. Note the connection and install the new switch in the same intended location without pinching the wiring.
• Check that the buttons or switch operate without sticking and that the connector is properly latched. The handlebar must be able to turn without straining the cable.
• Test each function individually before riding. When experiencing contact issues, inspect the connector and wiring, as the fault may not necessarily be in the switch itself.