Original switch for lights, turn signals, and horn for electric scooter KuKirin G2 Pro

Four control functions in one control unit

The black switch combines light toggling, left and right turn signals, a horn, and an additional power button. Functions are marked with symbols, and the connection is via a black multi-pin connector.

Features and fitment

• Model: KuKirin G2 Pro.
• Black switch for lights, turn signals, and horn with additional power button; black multi-pin connector.

Approximate dimensions

• Cable length: 106 mm.
• Connector: length 29.8 mm, diameter 7.8 mm.

The cable is approximately 106 mm long. Before replacement, compare the number of pins and support for each function in the wiring. Place the buttons within thumb reach and check that the brake lever does not obstruct them.

Replacement and function test

• Before replacement, disconnect the vehicle's power supply. Note the wiring and install the new switch in the same designated spot without pinching the wiring.
• Check that the buttons or key work without sticking and that the connector is properly snapped in. The handlebars must rotate without straining the cable.
• Before riding, test each function individually. When contact is interrupted, also check the connector and wiring, as the fault may not necessarily be in the switch itself.