ULIP Superior Metal brake pads for KuKirin T3

Superior Metal multi-metal brake pads for KuKirin T3

The brake pads for KuKirin T3 have a round friction surface and an extended tab. The backing plates are orange, and the set includes a pair of pads and a flat spacing spring.

Features and dimensions

• Vehicle model: KuKirin T3; fitment depends on the installed caliper.
• Compound: ULIP Superior Metal multi-metal.
• Backing plate: orange.
• Contents: two pads, spacing spring.
• Pad dimensions: approximately 22 × 33.4 × 4 mm.
• Weight of the displayed pair: approximately 14.4 g.

To select, compare the shape of the removed pads, mounting, and space in the caliper. This version uses round pads with a flat spring; when replacing a mechanical brake, also adjust the clearance near the disc.

Brake compound

The ULIP Superior Metal multi-metal compound is suitable for repeated braking and heating. Metal pads can be harder on the disc and are louder than organic ones, so check that the disc allows for such a mixture. A new pair requires proper bedding-in for even contact with the disc.

Replacement and bedding-in

• Replace the pair when the pad is worn, damaged, or contaminated with oil. Also check the condition of the disc and the minimum allowable pad thickness according to the brake instructions.
• Remove the safety clip and the old pads. After the caliper service procedure, prepare the space for the new pair, install the pads with the appropriate spring, and re-secure the mounting. Do not touch the friction surfaces with greasy hands.
• Adjust the position of the caliper or the gap between the pads. Check the lever response and free spinning of the wheel, then bed in the brakes with several gradual slow-downs on a safe surface.