ULIP 10x2.75-6.5 hybrid self-sealing tubeless tire for KuKirin G2 Ultra

Hybrid self-sealing tubeless tire ULIP 10x2.75-6.5 for KuKirin G2 Ultra

Hybrid profile: Densely spaced low blocks and channels in between.

The ULIP 10 × 2.75-6.5 tire combines a tubeless design, block profile, and sticky internal sealant layer. It is intended for a matching 6.5-inch rim seat.

Features and compatibility

• Model: KuKirin G2 Ultra.
• ULIP 10 × 2.75-6.5; tubeless with internal sealant layer; block profile.

Approximate dimensions

• Outer diameter: 243 mm.
• Inner diameter: 165 mm.
• Width: 79.2 mm.

The sealant layer can limit air leakage from small tread punctures. Regardless, inspect the tire regularly; major damage, cracks, or cuts on the side require repair or replacement.

Tire inspection and installation

• Replace the tire if the profile is worn, or if there are cracks, bulges, or damaged edges. Remove debris and check the condition of the rim before installation.
• Depressurize the wheel, remove the old tire, and install the new one without damaging the bead. Observe any rotation direction arrows.
• Adjust pressure according to allowed values for the wheel and load. Check for even seating and free rotation; recheck the pressure before your next ride.