Black ergonomic grips for Langfeite C1 – grip 120 mm, total 131 mm

Ergonomic black grips with clamps on both ends

The pair of black grips features a textured surface and flared palm support. Clamps on both ends restrict the rotation of the properly mounted grip on the handlebar.

Features and fitment

• Model: Langfeite C1.
• Pair of black ergonomic grips with palm support.
• Gripping area 120 mm; total length 131 mm.
• Mounting 22.2 mm; clamps on both ends.

Approximate dimensions

• Gripping area length: 120 mm.
• Total length: 131 mm.
• Diameter at inner end: 32 mm.
• Support width: 44 mm.
• Mounting diameter: 22.2 mm.

The gripping area measures 120 mm, with a total length including ends of approximately 131 mm. The inner diameter is 22.2 mm. Before mounting, check the space around the throttle and brake lever; do not force the replacement of shorter right-side grips near a twist throttle.

Support and grip adjustment

• Remove the old grips, then clean and dry the handlebar. Before securing, ensure the new grip fits completely onto the designated pipe section.
• Adjust the position for a relaxed wrist and reach to the brake lever. Tighten the clamping parts, where present, according to the instructions and verify that the grip does not rotate.
• Check for free throttle return. Replace torn, hardened, or slippery grips; do not apply lubricants to the gripping surface.