ULIP sintered brake pads for ECONO Gams MTB 29 EEC6 (2026) – Shimano BR-MT420

Wide ULIP sintered pads with ZEE M640 shape

The ULIP Sintered pair has bronze-colored carriers, a wide friction lining, and two upper mounting tabs. The entire outline of the pad measures approximately 39.4 × 24.5 mm, with a thickness of 4.1 mm.

Features and fitment

• Model: ECONO Gams MTB 29 EEC6 (2026).
• Brake compound: sintered metal – ULIP Sintered.
• ULIP Sintered, sintered brake pads.
• Bronze-colored carriers; spring and safety pin.
• Approximate dimensions 39.4 × 24.5 × 4.1 mm; pin hole 3.4 mm.

Approximate dimensions

• Pad: 39.4 × 24.5 × 4.1 mm.
• Hole: 3.4 mm.

The safety pin hole has a diameter of approximately 3.4 mm; a spring and cotter pin are included. Before choosing, compare the exact caliper designation and the shape of existing pads, especially for bikes with different years of equipment.

Compatibility condition: installed Shimano BR-MT420 caliper. Also compare the D01S/D02S/D03S family pad shape.

Brake compound

Sintered metal compound generally handles heating and wear well in wet conditions. Compared to organic pads, it may be louder and wear out the disc more. Use a disc that allows metal pads.

When to replace and how to start

• Inspect the pads if braking performance decreases, wear is uneven, or they are contaminated. Replace both pads in the same caliper; check the brake manual for the minimum allowed thickness.
• Remove the safety pin and the old pair. Prepare space for the new pads according to your caliper's procedure, then insert the spring, new pair, and safety pin. Do not apply grease to friction surfaces.
• Check the wheel's free spin and lever operation. Break in the new pads with several gradual decelerations in a safe area, without locking the wheel.