ULIP sintered brake pads for ECONO Gams SUV 29 C6 (2026) – Shimano BR-MT420

Wide sintered ULIP pads with ZEE M640 shape

The ULIP Sintered pair has bronze-colored backplates, a wide friction surface, and upper mounting tabs. The overall pad outline measures approximately 39.4 × 24.5 mm, and the thickness is 4.1 mm.

Features and compatibility

• Model: ECONO Gams SUV 29 C6 (2026).
• Brake compound: sintered metal – ULIP Sintered.
• ULIP Sintered, sintered brake pads.
• Bronze-colored backplates; spring and locking pin.
• Approximate dimensions 39.4 × 24.5 × 4.1 mm; pin hole 3.4 mm.

Approximate dimensions

• Pad: 39.4 × 24.5 × 4.1 mm.
• Hole: 3.4 mm.

The locking pin hole has a diameter of approximately 3.4 mm; a spring and a cotter pin are included. Before choosing, compare the exact caliper designation and the shape of existing pads, especially on bikes from different production years.

Compatibility condition: installed Shimano BR-MT420 caliper. Also compare the D01S/D02S/D03S pad family shape.

Brake compound

Sintered metal compound generally handles heat and wear well in wet conditions. Compared to organic, it can be louder and cause more disc wear. Use a disc that allows metal pads.

When to replace and how to start

• Inspect the pads in case of reduced braking performance, uneven wear, or contamination. Replace both pads in the same caliper; check your brake manual for the minimum allowed thickness.
• Remove the locking pin and the old pair. Prepare the space for new pads according to the procedure for your caliper, then insert the spring, the new pair, and the locking pin. Do not grease the friction surfaces.
• Check for free wheel rotation and lever operation. Bed in the new pads by performing several gradual stops in a safe area without locking the wheel.