ULIP sintered brake pads for Cube Editor Hybrid SLT 400X – Shimano BR-M6100

Sintered ULIP pads with Shimano M615 shape

The ULIP Sintered brake pads feature a top round ear and a wide rectangular friction surface. The dimensions of each pad are approximately 32.1 × 29.9 × 4.1 mm, and the hole for the retainer measures 3.8 mm.

Features and fitment

• Model: Cube Editor Hybrid SLT 400X.
• Brake pad: Sintered metal – ULIP Sintered.
• ULIP Sintered, sintered brake pads.
• Bronze-colored backing plates; spring and cotter pin included.
• Approximate dimensions 32.1 × 29.9 × 4.1 mm; pin hole 3.8 mm.

Approximate dimensions

• Pad: 32.1 × 29.9 × 4.1 mm.
• Hole: 3.8 mm.

The pair is complemented by a spring and cotter pin. Before replacing, check the exact designation of the installed caliper and use a brake rotor that supports metal pads.

Compatibility condition: Shimano BR-M6100 caliper installed. Also compare the shape with G01S/G03S/G04S family pads.

Brake pad material

Sintered metal pads generally handle heat and wear well in wet conditions. Compared to organic pads, they may be noisier and cause more wear on the rotor. Use a rotor that is compatible with metal pads.

When to replace and how to start

• Inspect the pads in case of reduced braking performance, uneven wear, or contamination. Replace both pads in the same caliper; check the minimum allowed thickness in your brake manual.
• Remove the retainer and the old pair. Following the procedure for your specific caliper, prepare space for the new pads, then insert the spring, the new pair, and the retainer. Do not grease the friction surfaces.
• Check wheel rotation and brake lever operation. Bed in the new pads with several gradual decelerations in a safe area, without locking the wheels.