Ceramic brake pads for NUTT calipers with cooling fins for Rovoron R7

Ceramic brake pads with cooling fins for NUTT caliper

This pair of ceramic brake pads features black backings with high cooling fins, a rectangular friction surface, and a slot for a retaining pin. The fins increase the surface area for heat dissipation, while the metal spreader spring and cotter pin complete the set for one compatible NUTT caliper.

Features and fitment

• Model: Rovoron R7.
• Brake compound: ceramic.
• Black backing plates with cooling fins; pair includes spring and cotter pin.

Approximate dimensions

• Dimensions with cooling fins: 41.3 × 42.4 mm.
• Maximum depth with cooling fins: 13.5 mm.
• Retaining pin hole diameter: 3.2 mm.

The outer outline of the backing plate measures approximately 41.3 × 42.4 mm, with a maximum depth of 13.5 mm including the fins. Before replacement, check the clearance above the caliper, the shape of the old pad, and the position of the retaining pin hole.

Use is only applicable for installed NUTT calipers with the appropriate pad shape and mounting type.

Brake compound

The ceramic compound forms the friction surface of the pads. To ensure even contact with the disc, break in the new pair gradually after installation. Keep the pad surface clean and dry; oil or grease on the friction surface will reduce braking performance.

When to replace and how to start

• Inspect the pads if braking performance drops, wear is uneven, or if they are contaminated. Always replace both pads in the same caliper; check the brake manual for the minimum allowed thickness.
• Remove the retaining pin and the old pair. Follow your caliper's procedure to prepare space for the new pads, then insert the spring, the new pair, and the retaining pin. Do not grease the friction surfaces.
• Check wheel rotation and lever feel. Break in the new pads by performing several gradual decelerations in a safe area without locking the wheel.