NUTT semi-metallic brake pads for Rovoron R7

Semi-metallic pads for the corresponding NUTT caliper

Black brackets with side ears and a rectangular friction surface make up a pair of semi-metallic pads. The friction area measures approximately 30 × 17 mm; a spring and locking pin are included.

Features and fitment

• Model: Rovoron R7.
• Brake compound: semi-metallic.
• Black pads with a friction area approx. 30 mm wide and 17 mm high.
• Pair with spring and cotter pin; shape for the corresponding NUTT caliper.

Approximate dimensions

• Friction surface: 30 × 17 mm.

The 30 × 17 mm dimension refers to the friction surface, not the entire outline. Before changing, check the installed caliper and the position of the mounting ears, especially on vehicles with upgraded brakes.

Application applies only to the installed NUTT caliper with the correct shape and pad mounting.

Brake compound

Semi-metallic compound combines metal particles and resin binder. The compound represents a compromise between initial bite and heat resistance. A clean disc and gradual bedding-in of the new pair are important for even braking.

When to replace and how to start

• Inspect the pads when braking performance decreases, uneven wear appears, or contamination occurs. Replace both pads in the same caliper; check the minimum allowed thickness in the brake manual.
• Remove the locking pin and the old pair. Prepare the space for the new pads according to the procedure for your caliper, then insert the spring, the new pair and the locking pin. Do not grease the friction surfaces.
• Check for free wheel rotation and lever operation. Bed in the new pads with several gradual slows in a safe place, without locking the wheel.