Brake disc 160 mm with 50 mm hole pattern for Rovoron S7

160 mm disc with a 50 mm mounting circle

The silver brake disc features six holes on a 50 mm circle and a rounded wavy edge. The openings run along the brake ring; six screws are included.

Features and fitment

• Model: Rovoron S7.
• 160 mm disc; 50 mm mounting hole circle; six screws.

Approximate dimensions

• Disc diameter: 160 mm.
• Mounting circle: 50 mm.
• Distance between adjacent holes: 25 mm.

The distance between adjacent holes is 25 mm. Before ordering, check this spacing on your hub and the permitted disc thickness for your caliper. A six-bolt mount with a 44 mm circle is a different version.

Disc replacement and alignment

• Replace the disc if it has cracks, permanent deformation, or wear below the minimum thickness. If you hear rubbing, first check the caliper alignment.
• Clean the hub contact surface and install the disc in the marked direction of rotation. Tighten the screws gradually in a cross pattern to the specified torque.
• Keep the braking surface clean and free of grease. After assembly, check for free rotation and braking; a new disc and pads require a proper bedding-in period.