Ceramic brake pads for NUTT calipers with cooling fins for Rovoron S7

Ceramic pads with cooling fins for NUTT caliper

The pair of ceramic brake pads features black backing plates with tall cooling fins, a rectangular friction surface, and a hole for the safety pin. The fins increase the heat dissipation surface, while the metal separation spring and cotter pin complete the set for one compatible NUTT caliper.

Features and fitment

• Model: Rovoron S7.
• Brake pad: ceramic.
• Black backing plates with cooling fins; pair with spring and cotter pin.

Approximate dimensions

• Dimensions of pad with cooling fin: 41.3 × 42.4 mm.
• Maximum fin depth: 13.5 mm.
• Diameter of safety pin hole: 3.2 mm.

The outer profile of the backing plate measures approximately 41.3 × 42.4 mm, with a maximum depth of 13.5 mm including fins. Before replacing, check the space above the caliper, the profile of the old pad, and the position of the safety pin hole.

Application applies only to an installed NUTT caliper with the correct shape and pad mounting system.

Brake pad composition

Ceramic compound forms the friction surface of the pads. To ensure even contact with the disc, break in the new pair gradually after mounting. Keep the pad clean and dry; oil or grease on the friction surface reduces braking performance.

When to replace and how to start

• Inspect the pads if you notice poor braking, uneven wear, or contamination. Always replace both pads in the same caliper; check the minimum allowed thickness in your brake manual.
• Remove the safety pin and the old pair. Follow the procedure for your specific caliper to create space for the new pads, then insert the spring, the new pair, and the safety pin. Do not grease the friction surfaces.
• Check wheel clearance and lever operation. Break in the new pads with several gradual decelerations in a safe area without locking the wheel.