Magura MT5/MT7 brake pads for Haibike NDURO 8 Freeride – Magura MT7

Dual friction area for compatible Magura caliper

Each black backing pad features two separate friction areas and an extended top tab. This shape is designed for a compatible Magura MT5, MT5e, or MT7 caliper.

Features and fitment

• Model: Haibike NDURO 8 Freeride.
• Black backing pads with two separate friction surfaces each.
• Shape for Magura MT5/MT7.

Before selecting, check the actual brake on your vehicle. The pads correspond to the specified caliper shape even when a suitable upgrade is made, but they are not an automatic replacement for pads in a series brake from another brand.

Only for Magura MT5, MT5e, or MT7 calipers with the corresponding pad shape. If the vehicle has a different caliper, these pads are not a direct replacement.

Brake pad material

The friction material presses against the disc, while the backing holds it in the correct position in the caliper. Replace both pads together if they are worn, damaged, or contaminated with oil. During installation, also check the retaining pin and free wheel movement.

When to replace and how to start

• Inspect pads if braking is poor, wear is uneven, or if they are contaminated. Replace both pads in the same caliper; check your brake manual for the minimum allowed thickness.
• Remove the retaining pin and the old pair. Prepare the space for the new pads according to the procedure for your specific caliper, then insert the spring, the new pair, and the pin. Do not grease the friction surfaces.
• Check for free wheel movement and lever operation. Bed in the new pads by performing multiple gradual decelerations in a safe location without locking the wheel.