ULIP Superior Metal brake pads for Giant AnyTour E+ 3 DD – Shimano MT200

Superior Metal in wide ZOOM shape

ULIP Superior Metal brake pads have an orange backplate, a wide rectangular pad, and a top mounting tab. The semi-metallic design is supplied as a pair with a spreader spring and a cotter pin.

Features and fitment

• Model: Giant AnyTour E+ 3 DD.
• Brake pad: semi-metallic – ULIP Superior Metal.
• ULIP Superior Metal; orange pads; pair with spring and cotter pin.

Approximate dimensions

• Pad dimensions: 30.6 × 35.1 × 4 mm.
• Retaining pin hole diameter: 3.3 mm.

The dimensions are approximately 30.6 × 35.1 × 4 mm, and the retaining pin hole diameter is approximately 3.3 mm. Verify the exact caliper designation for the listed model version and check disc compatibility for the selected pad.

This version requires a Shimano MT200 caliper. Compare the wide B-pad shape and the position of the retaining pin.

Brake pad material

The semi-metallic ULIP Superior Metal pad combines metallic components and a binder. Metallic pads generally handle heat well under repeated braking, but they may be noisier and wear the disc more than organic pads. Use a disc compatible with metallic pads, and bed in the new pair properly after installation.

When to replace and how to start

• Inspect pads if braking performance drops, wear is uneven, or contamination occurs. Replace both pads in the same caliper; check the minimum allowed thickness in the brake manual.
• Remove the retaining pin and the old pair. Prepare the space for the new pads according to the procedure for your caliper, then insert the spring, the new pair, and the retaining pin. Do not grease the friction surfaces.
• Check the wheel for free rotation and test the lever action. Bed in the new pads with several gradual decelerations in a safe location, without locking the wheel.