ULIP sintered brake pads for Giant AnyTour E+ 1 LST (2027) – Shimano BR-MT420

ULIP Wide Sintered Brake Pads with ZEE M640 shape

The ULIP Sintered pair features bronze-colored backing plates, a wide friction surface, and upper mounting tabs. The overall pad profile measures approximately 39.4 × 24.5 mm, with a thickness of 4.1 mm.

Features and Fitment

• Model: Giant AnyTour E+ 1 LST (2027).
• Brake pad material: Sintered metal – ULIP Sintered.
• ULIP Sintered brake pads.
• Bronze-colored backing plates; includes spring and retaining pin.
• Approximate dimensions 39.4 × 24.5 × 4.1 mm; pin hole 3.4 mm.

Approximate dimensions

• Pad: 39.4 × 24.5 × 4.1 mm.
• Hole: 3.4 mm.

The pin hole has a diameter of approximately 3.4 mm; includes a spring and split pin. Before purchasing, verify the specific brake caliper model and the shape of your existing pads, especially for bikes with different model-year components.

Compatibility requirement: Shimano BR-MT420 caliper. Also, compare the shape of D01S/D02S/D03S family pads.

Brake pad compound

Sintered metal pads typically handle heat well and offer good wear resistance in wet conditions. Compared to organic pads, they may be noisier and cause more disc wear. Ensure your disc is compatible with metal pads.

When to replace and how to install

• Inspect pads if braking performance decreases, wear is uneven, or they are contaminated. Always replace both pads in the same caliper; check the brake manual for the minimum allowable thickness.
• Remove the retainer and the old pair. Prepare the space for the new pads according to your caliper's procedure, then insert the spring, the new pair, and the retainer. Do not grease the friction surfaces.
• Check wheel clearance and lever operation. Break in new pads with several gradual stops in a safe area without locking the wheel.