ULIP sintered brake pads for Giant Explore E+ 1 (2026) – Shimano BR-MT420

Wide ULIP sintered pads with ZEE M640 shape

The pair of ULIP Sintered pads features bronze-colored backings, a wide friction surface, and upper mounting tabs. The overall pad outline measures approximately 39.4 × 24.5 mm, with a thickness of 4.1 mm.

Features and fitment

• Model: Giant Explore E+ 1 (2026).
• Brake pad: sintered metal – ULIP Sintered.
• ULIP Sintered, sintered brake pads.
• Bronze-colored backings; spring and cotter pin included.
• Approximate dimensions 39.4 × 24.5 × 4.1 mm; pin hole 3.4 mm.

Approximate dimensions

• Pad: 39.4 × 24.5 × 4.1 mm.
• Hole: 3.4 mm.

The hole for the cotter pin has a diameter of approximately 3.4 mm; a spring and pin are included. Before choosing, compare the exact caliper designation and the shape of the existing pads, especially for bikes with different model years of components.

Compatibility condition: Shimano BR-MT420 caliper installed. Also compare the D01S/D02S/D03S family pad shape.

Brake pad composition

Sintered metal pads generally handle heat well and offer good wear resistance in wet conditions. Compared to organic, they can be louder and cause more disc wear. Use a disc that allows metal pads.

When to replace and how to start

• Inspect the pads if braking performance decreases, wear is uneven, or they are contaminated. Replace both pads in the same caliper; check the minimum allowed thickness in the brake manual.
• Remove the cotter pin and the old pair. Prepare space for the new pads according to the procedure for your specific caliper, then insert the spring, the new pair, and the pin. Do not grease friction surfaces.
• Check wheel free play and lever operation. Bed in the new pads with several gradual slows in a safe area without locking the wheel.